The Arc Roof is a fixed construction, based on three inward-curving trusses that are mounted to side masts. A hinged connection at the outer ends simplifies system setup. Special corners connect the arches to the main grid. Different configurations are made possible by simply changing the arches. The arched trusses have a keder profile on top for fitting the optional canopy.
BASIC TRUSSING
Tower – MPT base sections
H30V truss
Grid – H30D arched truss - with keder profile
INCLUDING
• Tension gear and steel wires
• Comprehensive building manual
• Structural report
ROOF STRUCTURE
Towers - Non. Portal structure, MPT base sections and H30V truss
Main grid - H30V truss and 6 special corners
TECHNICAL SPECIFICATIONS - ARC ROOF
Dimensions - 10 x 8 m , 8 x 6 m, 6 x 4 m, (32’9” x 26’3”), (26’3” x 19’8”), (19’8” x 13’1”)
OPTIONS
Canopy - side, back and top
Canopy colour - standard: outside grey, inside black (other colours possible)
Soundwings - no
Ballast - several possibilities on request depending on construction and wind speed
Staging - Prolyte stage elements, EasyFrame B or Probeam combined with a scaffolding stage
HINGED ARC ROOF
Prolyte has developed a very clever variation to its existing Arc Roof – a hinged system. The hinged construction on the mast sections allows for construction at stage level, cutting build times and improving safety during build-up. When the complete roof is built and the canopies are in position, the entire structure can then be hoisted into position, using two manual chain hoists connected to the towers at the rear. Once the roof is lifted into place, 8 additional pins are used to secure the hinges in the masts thereby securing the complete system.
Instructions