The CLT Roof is a tower-based structure with a curved roof. It is based on the standard MPT Roof, which can easily be transformed into a CLT Roof simply by adding a different set of top units.
The CLT rooftop section is based on arched H30D truss with integrated keder profiles to mount the canopy. These arches are supported by special frames which are mounted on the basic grid trusses.
INCLUDING
• Tension gear and steel wires
• Structural report
ROOF STRUCTURE
Towers 4 x MPT-tower
Main grid H40V and H30D truss
OPTIONS
Canopy - side, back and top
Canopy colour - standard: outside grey, inside black (other colours possible)
Soundwings - optional
Ballast - several possibilities on request from 1 - 7,5 ton per tower depending on construction and wind speed
Staging - Prolyte stage elements, EasyFrame B or Probeam combined with a scaffolding stage
Cantilever - yes (included)
ProLyft hoist - yes (included)
(12x10 CLT roof) - 4x PAE-1000DC-0020 4x PAE-A-FC1000 1x PLA-33-20 2x PLA-30-10 1x PAE-C4DC-10 1x PLA-41-001
4x PAE-A-50-010 2x PLA-30-20 1x PLA-34-02
Comprehensive building manual - yes
Instructions