Couplers and baseplates

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

The steel baseplates are standard available in a round version as well as a square version. The plates are suited for all 30- and 40 series truss in triangular, square and rectangular shapes. Each plate has two reinforced grips, which makes them easier to handle. The baseplates are standard available in a black-coated version or a galvanized version. Each plate is delivered including 4 male receivers (CCS6-602) and 4 countersunk bolts (BM-M12x030-IB CS) to connect them to the plate.

The steel baseplates are standard available in a round version as well as a square version. The plates are suited for all 30- and 40 series truss in triangular, square and rectangular shapes. Each plate has two reinforced grips, which makes them easier to handle. The baseplates are standard available in a black-coated version or a galvanized version. Each plate is delivered including 4 male receivers (CCS6-602) and 4 countersunk bolts (BM-M12x030-IB CS) to connect them to the plate.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

Baseplates are designed to facilitate 3 dimensional structures, legs and small towers, by creating a stable and flat surface. The truss can be attached using half conical connector or offset half conical connector. Pre-drilled holes make assembly and mounting easy.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS4 conical coupler system is designed to offer a rigid and very strong connection between truss sections of the E20 series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

Spacers are used to add or overcome a small size difference in your truss construction. Spacers can also be used to pre-tension larger truss spans.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. The CCS6-600H is a hybrid coupler, offering the strenght of a regular coupler combined with the smoothness and distinctive colour of the plastic material. Patented model.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

Spacers are used to add or overcome a small size difference in your truss construction. Spacers can also be used to pre-tension larger truss spans.

The CCS7 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the heavy-duty series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS7 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the heavy-duty series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS7 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the heavy-duty series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

The CCS7 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the heavy-duty series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

The CCS7 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the heavy-duty series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.